最近因为折腾宿迁服务器，没有宝塔等环境，上传下载文件较为麻烦，使用Python写了个上传下载文件的软件。
代码使用了Tkinter做UI，可同时添加8个服务器（本来想做CMD，但是使用太麻烦了
UI
完整代码
import os
import tkinter as tk
import webbrowser
from tkinter import filedialog,messagebox
import easygui
root = tk.Tk()
import re
import paramiko
from scp import SCPClient
def download_file_pkey(DOWNLOAD_SERVER_REMOTE_PATH,DOWNLOAD_LOCAL_FILE_PATH,HOST,PORT,USERNAME):
ssh_client = paramiko.SSHClient()
ssh_client.set_missing_host_key_policy(paramiko.AutoAddPolicy)
try:
private_key = paramiko.RSAKey.from_private_key_file('pkey')
except Exception as e:
try:
private_key = paramiko.Ed25519Key.from_private_key_file('pkey')
except Exception as e:
messagebox.showerror('下载失败', '不支持的密钥类型(必须为RSA或Ed25519)')
try:
ssh_client.connect(HOST, PORT, USERNAME, pkey=private_key)
scp_client = SCPClient(ssh_client.get_transport(), socket_timeout=15.0)
scp_client.get(DOWNLOAD_SERVER_REMOTE_PATH, DOWNLOAD_LOCAL_FILE_PATH)
except FileNotFoundError as e:
print(e)
print("系统找不到指定文件" + DOWNLOAD_SERVER_REMOTE_PATH)
ssh_client.close()
return [False,'系统找不到指定文件：'+ DOWNLOAD_SERVER_REMOTE_PATH]
except Exception as e:
ssh_client.close()
return [False, str(e)]
else:
print("文件下载成功")
ssh_client.close()
return [True, '']
def upload_file_pkey(UPLOAD_LOCAL_FILE_PATG,UPLOAD_SERVER_REMOTE_PATH,HOST,PORT,USERNAME):
ssh_client = paramiko.SSHClient()
ssh_client.set_missing_host_key_policy(paramiko.AutoAddPolicy)
try:
private_key = paramiko.RSAKey.from_private_key_file('pkey')
except Exception as e:
try:
private_key = paramiko.Ed25519Key.from_private_key_file('pkey')
except Exception as e:
messagebox.showerror('上传失败','不支持的密钥类型(必须为RSA或Ed25519)')
try:
ssh_client.connect(HOST, PORT, USERNAME, pkey=private_key)
scp_client = SCPClient(ssh_client.get_transport(), socket_timeout=15.0)
scp_client.put(UPLOAD_LOCAL_FILE_PATG, UPLOAD_SERVER_REMOTE_PATH)
except FileNotFoundError as e:
print(e)
print("系统找不到指定文件：" + UPLOAD_LOCAL_FILE_PATG)
ssh_client.close()
return [False,("系统找不到指定文件：" + UPLOAD_LOCAL_FILE_PATG)]
except TimeoutError as e:
print(e)
print("连接超时")
return [False, '链接超时，请检查SSH配置和IP']
except Exception as e:
print(e)
ssh_client.close()
return [False, str(e)]
else:
print("文件上传成功")
ssh_client.close()
return [True,'文件上传成功']
def upload_file(UPLOAD_LOCAL_FILE_PATG,UPLOAD_SERVER_REMOTE_PATH,HOST,PORT,USERNAME,PASSWORD):
ssh_client = paramiko.SSHClient()
ssh_client.set_missing_host_key_policy(paramiko.AutoAddPolicy)
try:
ssh_client.connect(HOST, PORT, USERNAME, PASSWORD)
scp_client = SCPClient(ssh_client.get_transport(), socket_timeout=15.0)
scp_client.put(UPLOAD_LOCAL_FILE_PATG, UPLOAD_SERVER_REMOTE_PATH)
except FileNotFoundError as e:
print(e)
print("系统找不到指定文件：" + UPLOAD_LOCAL_FILE_PATG)
ssh_client.close()
return [False,("系统找不到指定文件：" + UPLOAD_LOCAL_FILE_PATG)]
except TimeoutError as e:
print(e)
print("连接超时")
return [False, '链接超时，请检查SSH配置和IP']
except Exception as e:
print(e)
ssh_client.close()
return [False, str(e)]
else:
print("文件上传成功")
ssh_client.close()
return [True,'文件上传成功']
def download_file(DOWNLOAD_SERVER_REMOTE_PATH,DOWNLOAD_LOCAL_FILE_PATH,HOST,PORT,USERNAME,PASSWORD):
ssh_client = paramiko.SSHClient()
ssh_client.set_missing_host_key_policy(paramiko.AutoAddPolicy)
try:
ssh_client.connect(HOST, PORT, USERNAME, PASSWORD)
scp_client = SCPClient(ssh_client.get_transport(), socket_timeout=15.0)
scp_client.get(DOWNLOAD_SERVER_REMOTE_PATH, DOWNLOAD_LOCAL_FILE_PATH)
except FileNotFoundError as e:
print(e)
print("系统找不到指定文件" + DOWNLOAD_SERVER_REMOTE_PATH)
ssh_client.close()
return [False,'系统找不到指定文件：'+ DOWNLOAD_SERVER_REMOTE_PATH]
except Exception as e:
ssh_client.close()
return [False, str(e)]
else:
print("文件下载成功")
ssh_client.close()
return [True, '']
def check_ip(ipAddr):
compile_ip=re.compile('^(1\d{2}|2[0-4]\d|25[0-5]|[1-9]\d|[1-9])\.(1\d{2}|2[0-4]\d|25[0-5]|[1-9]\d|\d)\.(1\d{2}|2[0-4]\d|25[0-5]|[1-9]\d|\d)\.(1\d{2}|2[0-4]\d|25[0-5]|[1-9]\d|\d)$')
if compile_ip.match(ipAddr):
return True
else:
return False
def changecof():
with open('./config.json') as f:
config = f.read()
config = eval(config)
backgui=easygui.buttonbox('请选择要对选中服务器进行的操作：',config[str(v.get())][0]+' 设置',['查看当前各项信息','更改ip','更改SSH信息','密钥/密码切换'])
print(backgui)
if backgui==None:
pass
elif backgui=='查看当前各项信息':
modole='密钥'
password=config[str(v.get())][2]
if config[str(v.get())][4]=='mm':
modole='密码'
elif config[str(v.get())][4]=='my':
password='密钥过长，请点击显示密钥查看当前密钥'
buildTEXT='IP：%s\nSSH端口：%s\nSSH用户名：%s\nSSH验证模式：%s\nSSH密码：%s\n'%(config[str(v.get())][0],config[str(v.get())][3],config[str(v.get())][1],modole,password)
backgui_rec=easygui.buttonbox(buildTEXT,config[str(v.get())][0]+'服务器信息',['完成','查看密钥'])
if backgui_rec=='查看密钥' and modole=='密钥':
easygui.msgbox(config[str(v.get())][2],config[str(v.get())][0]+' 密钥',ok_button='完成')
else:
if modole=='密码':
messagebox.showwarning('错误','当前SSH验证模式为密码')
elif backgui=='更改ip':
changip=easygui.enterbox('请输入新的服务器ip','更改ip')
if changip!=None:
print(check_ip(changip))
if check_ip(changip):
config[str(v.get())][0]=changip
with open('./config.json','w') as f:
f.write(str(config))
messagebox.showinfo('完成','操作完成，UI更新可能有延迟，请重启程序')
else:
messagebox.showwarning('IP不合法', '输入的IP不合法，请检查后再试')
else:
messagebox.showinfo('取消', '操作取消')
elif backgui=='更改SSH信息':
backguisec = easygui.buttonbox('请选择要对选中服务器进行的操作：', '更改SSH信息',
['更改SSH密码/密钥', '更改SSH用户名', '更改SSH端口'])
if backguisec==None:
pass
elif backguisec=='更改SSH密码/密钥':
if config[str(v.get())][4]=='mm':
config[str(v.get())][2] = easygui.enterbox('当前是密码模式，请输入新的SSH密码', '更改SSH密码')
if config[str(v.get())][2]!='' and config[str(v.get())][2]!=None:
with open('./config.json', 'w') as f:
f.write(str(config))
messagebox.showinfo('完成','操作完成')
else:
#messagebox.showinfo('取消','操作取消')
pass
elif config[str(v.get())][4]=='my':
config[str(v.get())][2]=easygui.enterbox('当前是密钥模式，请直接将密钥粘贴于此：','更改SSH密钥')
if config[str(v.get())][2] != '' and config[str(v.get())][2] != None:
with open('./config.json', 'w') as f:
f.write(str(config))
messagebox.showinfo('完成','操作完成')
else:
#messagebox.showinfo('取消','操作取消')
pass
elif backguisec == '更改SSH用户名':
config[str(v.get())][1] = easygui.enterbox('请输入新的SSH用户名', '更改SSH用户名')
if config[str(v.get())][1]!='' and config[str(v.get())][1]!=None:
with open('./config.json', 'w') as f:
f.write(str(config))
messagebox.showinfo('完成','操作完成')
elif backguisec == '更改SSH端口':
config[str(v.get())][3] = easygui.enterbox('请输入新的SSH端口', '更改SSH端口')
if config[str(v.get())][3] != '' and config[str(v.get())][3] != None:
with open('./config.json', 'w') as f:
f.write(str(config))
messagebox.showinfo('完成','操作完成')
elif backgui=='密钥/密码切换':
if config[str(v.get())][4]=='mm':
config[str(v.get())][4]='my'
with open('./config.json', 'w') as f:
f.write(str(config))
messagebox.showinfo('完成','密码类型已更改为密钥，请前往SSH信息更改更改密钥')
elif config[str(v.get())][4] == 'my':
config[str(v.get())][4] = 'mm'
with open('./config.json', 'w') as f:
f.write(str(config))
messagebox.showinfo('完成', '密码类型已更改为密码，请前往SSH信息更改更改密码')
else:
messagebox.showerror('错误', '配置文件异常(Service-Code:17)')
def showinfo():
with open('./topmost') as f:
tpn=f.read()
if str(tpn)=='1':
tpns='开'
else:
tpns='关'
backgui=easygui.buttonbox('关于本程序','关于',['是否置顶(当前%s)'%tpns,'本程序介绍&版权声明'])
if backgui!=None:
if backgui.find('是否置顶')!=-1:
if tpns=='开':
with open('./topmost','w') as f:
f.write('0')
messagebox.showinfo('完成','操作完成，重启见效果')
else:
with open('./topmost','w') as f:
f.write('1')
messagebox.showinfo('完成','操作完成，重启见效果')
else:
webbrowser.open('https://www.lowion.cn/shellfile-v1-0%e9%9a%86%e9%87%8d%e6%8e%a8%e5%87%ba/', new=0, autoraise=True)
def upload():
uploadfile_path = filedialog.askopenfilename()
if uploadfile_path!='':
remote_path = easygui.enterbox('请输入文件上传到服务器的目录，如：/root/upload/','文件上传')
if not remote_path==None and not remote_path=='':
with open('./config.json') as f:
config = f.read()
config = eval(config)
config=config[str(v.get())]
print(config)
laste_check=easygui.boolbox('确认上传？\n从'+uploadfile_path+' 到 '+config[0]+"@"+remote_path+'\n\n上传期间软件可能会卡死，稍等即可','上传确认',choices=['确认（开始上传）','取消'])
if laste_check:
with open('./config.json') as f:
config_key = f.read()
config_key = eval(config_key)
if config_key[str(v.get())][4]=='mm':
upload_status = upload_file(uploadfile_path, remote_path, config[0], config[3], config[1], config[2])
else:
with open('./pkey','w') as f:
f.write(config_key[str(v.get())][2])
upload_status=upload_file_pkey(uploadfile_path, remote_path, config[0], config[3], config[1])
if upload_status[0]:
messagebox.showinfo('成功', '上传成功')
else:
messagebox.showerror('上传失败','文件上传失败：'+upload_status[1])
else:
messagebox.showinfo('取消', '用户取消')
else:
if remote_path == None:
messagebox.showinfo('取消', '用户取消')
else:
messagebox.showinfo('提示', '请不要输入空路径，操作取消')
else:
messagebox.showinfo('提示', '请选择文件，操作取消')
def download():
with open('./config.json') as f:
config = f.read()
config = eval(config)
config = config[str(v.get())]
with open('./DIR_config.json') as f:
download_dir=f.read()
serverfile_path=easygui.enterbox('请输入要下载文件在服务器上的地址，如：/root/123.txt','文件下载')
if serverfile_path!="" and serverfile_path!=None:
print(config)
laste_check = easygui.boolbox('确认下载？\n从'+config[0]+'@'+serverfile_path+'到本地'+download_dir+'\n\n下载期间软件可能会卡死，稍等即可', choices=['确认', '取消'])
if laste_check:
with open('./config.json') as f:
config_key = f.read()
config_key = eval(config_key)
if config_key[str(v.get())][4] == 'mm':
upload_status=download_file(serverfile_path,download_dir,config[0],config[3],config[1],config[2])
else:
with open('./pkey', 'w') as f:
f.write(config_key[str(v.get())][2])
upload_status = download_file_pkey(serverfile_path,download_dir,config[0],config[3],config[1])
if upload_status[0]:
messagebox.showinfo('成功', '下载成功，文件已下载到：'+download_dir)
else:
messagebox.showerror('上传失败', '文件下载失败：' + upload_status[1])
else:
if serverfile_path=="":
messagebox.showwarning('错误', '路径输入错误')
else:
messagebox.showinfo('取消', '用户取消')
def setdir():
cdir=filedialog.askdirectory()
if cdir=='':
messagebox.showinfo('取消', '用户取消')
else:
with open('./DIR_config.json','w') as f:
f.write(cdir)
messagebox.showinfo('完成', '操作完成')
root.title('ShellFile v1.0')
root.geometry('279x320+500+500')
root.resizable(False, False)
tk.Button(root, text='上传文件', width=12, height=2,command=lambda:upload()).place(x=0, y=0)
tk.Button(root, text='下载文件', width=12, height=2,command=lambda:download()).place(x=93, y=0)
tk.Button(root, text='设定下载目录', width=12, height=2,command=lambda:setdir()).place(x=186, y=0)
tk.Button(root, text='编辑选中的服务器', width=39, height=2,command=lambda:changecof()).place(x=0, y=50)
tk.Button(root, text='关于本程序', width=45, height=1,command=lambda:showinfo()).place(x=-27, y=291)
v = tk.IntVar()
v.set(0)
find=False
for i in os.listdir('./'):
if i=='topmost':
find=True
default=1
if not find:
with open('topmost','w') as f:
f.write(str(default))
with open('topmost','r') as f:
nstu=f.read()
root.attributes("-topmost",int(nstu))
find=False
for i in os.listdir('./'):
if i=='config.json':
find=True
default={'0':['255.255.255.255','root','1234567','22','mm'],'1':['255.255.255.255','root','1234567','22','mm'],'2':['255.255.255.255','root','1234567','22','mm'],'3':['255.255.255.255','root','1234567','22','mm'],'4':['255.255.255.255','root','1234567','22','mm'],'5':['255.255.255.255','root','1234567','22','mm'],'6':['255.255.255.255','root','1234567','22','mm']}
if not find:
with open('./config.json','w') as f:
f.write(str(default))
with open('./config.json') as f:
config=f.read()
config=eval(config)
find=False
for i in os.listdir('./'):
if i=='DIR_config.json':
find=True
default="C:/Users/%s/Downloads" %os.getlogin()
print(default)
if not find:
with open('./DIR_config.json','w') as f:
f.write(str(default))
bt1=tk.Radiobutton(root, text=config['0'][0],activebackground='red',variable=v, value=0)
bt1.place(x=80, y=120,anchor='w')
bt2=tk.Radiobutton(root, text=config['1'][0],activebackground='red',variable=v, value=1)
bt2.place(x=80, y=145,anchor='w')
bt3=tk.Radiobutton(root, text=config['2'][0],activebackground='red',variable=v, value=2)
bt3.place(x=80, y=170,anchor='w')
bt4=tk.Radiobutton(root, text=config['3'][0],activebackground='red',variable=v, value=3)
bt4.place(x=80, y=195,anchor='w')
bt5=tk.Radiobutton(root, text=config['4'][0],activebackground='red',variable=v, value=4)
bt5.place(x=80, y=220,anchor='w')
bt6=tk.Radiobutton(root, text=config['5'][0],activebackground='red',variable=v, value=5)
bt6.place(x=80, y=245,anchor='w')
bt7=tk.Radiobutton(root, text=config['6'][0],activebackground='red',variable=v, value=6)
bt7.place(x=80, y=270,anchor='w')
root.mainloop()
Exe版
Preview v1.0：
Final version v1.0:
Comments NOTHING